OhmPi project

Logo OhmPi


Rémi CLEMENT, Vivien DUBOIS, Nicolas Forquet, INRAE, REVERSAAL, Villeurbanne, France
Yannick FARGIER, GERS-RRO, Univ Gustave Eiffel, IFSTTAR, Lyon, France
Hélène GUYARD, IGE Grenoble, Université Grenoble Alpes, Grenoble, France
Olivier KAUFMANN, Arnaud WATLET, Université de Mons, Mons, Belgium
Guillaume BLANCHY, ILVO, Merelbeke, Belgium|


_images/logo_inrae.jpg _images/logo_univ_gustave.png _images/logo_ilvo.png
_images/logo_univ_mons.png _images/ige.png _images/logo-iris.jpg

Citing OhmPi:

Rémi Clement, Yannick Fargier, Vivien Dubois, Julien Gance, Emile Gros, et al.. OhmPi: An open source data logger for dedicated applications of electrical resistivity imaging at the small and laboratory scale. HardwareX, Elsevier, 2020, 8, 24 p. ff10.1016/j.ohx.2020.e00122ff.

Introduction :


**OhmPi is a participative project open to all, it requires skills in electronics and to respect the safety rules. OhmPi must be assembled in a professional context and by people competent in electronics. The OhmPi team cannot be held responsible for any material or human damage which would be associated with the use or the assembly of OhmPi. The OhmPi team cannot be held responsible if the equipment does not work after assembly. You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-P v2 (https:/cern.ch/cern-ohl). This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-P v2 for applicable conditions **

This documentation presents the development of a low-cost, open hardware resistivity meter to provide the scientific community with a robust and flexible tool for small-scale experiments. Called OhmPi, this basic resistivity meterfeatures current injection and measurement functions associated with a multiplexer that allows performing automatic measurements with up to 64 electrodes.OhmPi’s philosophy is to provide a fully open source and open hardware toolto the near surface scientific community.


Anyone who wants to get involved is welcome to join the OhmPi project!